Tweaked Sweep Compact case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An FDM printed case for the Tweaked Sweep Compact pcb modified by benvallack.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 436
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case that was designed to fit around the pcb that benvallack designed based on the ferris sweep. I wanted something that would protect any tabletop from the pins that stick through the bottom after the components are soldered on.
Overall the case adds 2mm around the edge of the pcb and 2mm to the overall thickness. The provided 3mf file is for the left half. To get the right half, just mirror the case in your slicer.
Here is a link to ben's github page for the pcbs: https://github.com/benvallack/Ferris-Sweep-Tweaked/tree/main
Print Settings
- Infill: 20% Gyroid
- Perimeters: 2 (can also do 3)
- Layer height: 0.2mm
- Supports: none