Tweaked Sweep Compact case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An FDM printed case for the Tweaked Sweep Compact pcb modified by benvallack.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case that was designed to fit around the pcb that benvallack designed based on the ferris sweep. I wanted something that would protect any tabletop from the pins that stick through the bottom after the components are soldered on.
Overall the case adds 2mm around the edge of the pcb and 2mm to the overall thickness. The provided 3mf file is for the left half. To get the right half, just mirror the case in your slicer.
Here is a link to ben's github page for the pcbs: https://github.com/benvallack/Ferris-Sweep-Tweaked/tree/main
Print Settings
- Infill: 20% Gyroid
- Perimeters: 2 (can also do 3)
- Layer height: 0.2mm
- Supports: none