Bambu AMS RepRack Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your AMS to your RepRack with drawer slides for easy access, storage and feeding the beast.
- Rating
- 4.2 / 5
- Likes
- 51
- Downloads
- 114
- Makes
- 3
- Views
- 2,482
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
After burning through multiple spools of filament with test prints, and a dozen modifications, I feel confident this is a great solution for a RepRack AMS mounting system. I will be posting detailed instructions if needed.
CHECK REMIXES for other versions!
IMPORTANT NOTE: This version fits the 3 SIDE SLOT Version AMS. There are 2 other versions. 5 Slot version or a new universal version in the works.
This is a Project! I made it as plug-N-play as possible, but does require drawer slides.
- Does NOT screw into AMS, AMS slides onto the Right/Left Mount.
- Used 10inch Drawer Slides found on Amazon: https://a.co/d/6Vsg7Ce
- RepRack Rod Bracket (Slides onto your conduit Rods) is the same for left and right.
- AMS Mount has a right and left side.
- I had to move a RepRack hanger to allow for space and to be centered below my top reprack row. You might not have to do this.
PRINT SETTINGS:
- Modified 100% Infil: I used slicer modifiers to set infill to 100% on the top of the Rod Brackets and the outside mounting point point for AMS Mounting brackets (Bambu Studio .3mf files attached). Mark brackets where your drawer slides will mount, and pre-drill for screws that came with drawer slides. It's solid!
- I used Polymaker PLA PRO Dark Grey (a.k.a. DarK2 Grey - K2 Dark Grey)
- 0.28 Layer Height
NOTE: As long as your AMS can fit on one of your RepRacks between rows, mine are 91/4 inches between rows (Rod bottom to the below racks Rod Top)
