Steel wire stopper (v2)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.69 – €3.29 net (excluding VAT)
For file: steel_wire_stopper v2_0.4n_0.15mm_PETG_MK3S_3h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.99 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 3.57 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fast and easy to print steel wire stopper which can be secured with two M8 screws. Designed for 16mm steel wires.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 1
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
V2 of my steel wire stopper which can now be secured with just two M8 screws with proper washers. Best with self securing screws.
Stopper can be mounted on winch steel wires to indicate the resting position of the wire.
Designed for wires of 16mm thickness. The stopper itself is 6cm in diameter and 2.5cm wide.
Printed with PETG and tested on the steel wire of the Rotzler TR 080/70 on a Fire truck.