MINI x-end new version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New version to prevent the MINI-x-carriage from jamming at the end of the arm.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 233
- Makes
- 5
- Views
- 2,137
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I designed a different version of the x-end for the Prusa MINI, as tightening the screws led to clamping problems on the MINI-x slide when it was running towards the x-end. That's why I developed a version in which the M5 grub screw clamps the rods in such a way that there is no distortion and the MINI-x slide can run freely, which was not the case before. I guarantee it will work well and that the problems with the MINI-x slide on the end of the arm will be a thing of the past.
In addition, you have easier access to the bearing housing 623h and you do not have to take the X-carriage halfway apart because of the belt.
required parts:
4x M5 x 4mm grub screw (DIN 913)