1 / 4
Tripod phone mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secure phone holder with 1/4 inch. tripod thread
- Rating
- 4.667 / 5
- Likes
- 32
- Downloads
- 194
- Makes
- 3
- Views
- 2,155
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a support to place my cell phone on the tripod and after not finding any that made me feel confident I decided to design my own.
Some things to take into account is that the support has a built-in tripod thread, since in Spain it is quite difficult to find 1/4 inch nuts. Also an 8mm M3 screw is needed to attach the wheel to the threaded rod.
Print instructions
- Recommended 0.2mm layer height.
- All parts should be printed in the default orientation for best results.
- It is recommended to print the rod with a brim of 3-4mm.
- The bottom part contains a 0.2mm layer on top of where the wheel is located to allow for unsupported bridging. This layer must be cut once the part is printed.
- No support needed.
Hardware
- M3 x 8mm screw