SunsetLake, GITD Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The start of my GLOW series.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Start of My Glow Series
Sunset Lake
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Initial base I have set to be 0.48mm thick to make them a bit thicker, Painting will begin after 0.48mm as per usual, just you will have a few first layers to make the print stronger.
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Cobalt Blue
At layer #13 (1.12mm) swap to Red
At layer #14 (1.2mm) swap to Purple
At layer #15 (1.28mm) swap to Gold (ONLY for half layer, just the sky and then the lake outline or it will cover the purple)
At layer #19 (1.6mm) swap to GITD Blue for the rest.