Benchy Shelf Display Rack Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.47 – €1.80 net (excluding VAT)
For file: ben7_0.4n_0.2mm_PLA_MK3S_1h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.61 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple Under shelf display rack/holder to show your benchy colors.
- Rating
- 4.25 / 5
- Likes
- 84
- Downloads
- 325
- Makes
- 4
- Views
- 1,775
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Push and twist right in place. Sits firm in place for no wiggle or movement.
Holds in from the 9mm hole in the back of the Benchy.
- Holds 7-3 Benchys
- Screw/Tape option (4mm Screw Hole)
- 20%infill
- No supports
STEPS:
- Rotate Benchy to the Right a bit
- Put the Benchy on the corner.
- Rotate it a little bit to the left and add pressure. Push back as far as possible.
Some of the pegs are tighter than others. need to add more pressure.
(Tape sticks on Wood, Cardboard, Metal, etc)
Thin Double Sided Tape: (Amazon)⬇
Measurements:⬇
