Bed Mounted Z-Endstop Ender / Switchwire Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed Mounted Z-Endstop Ender / Switchwire Conversion for Protolofts Auto-Z Macro
- Rating
- 4 / 5
- Likes
- 36
- Downloads
- 133
- Makes
- 1
- Views
- 1,565
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Nozzle Endstop mount for using Auto-Z Implementation with Klicky (Voron) or Klack (Kevinakasam).
Mounting with bed screw, use a soild spacer (metal for example, the picture is old i then used a spacer from the wheel as i'm using linear rails) between the bed and plate to ensure the mount it not moving and solid and shorten the 5mm rod that it sits somewhat flush the bed, so it doesn't hit the rod while printing with the toolhead.
To reach that position with the nozzle is very likely that you have to move the Y-Extrusion one set of holes forward.
Endstop Housing
https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/Z_Endstop
Building: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/Manual/Assembly_Manual_2.4r2.pdf Side 158&159
When using Klack the software configuration is still in beta and refer to the kevinakasam discord. With klicky you can refer to the protoloft auto z documentation: