USPS Collection Box (Blue Box) Mail Holder Using a Vintage PO Box Door
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.87 – €2.28 net (excluding VAT)
For file: front_0.4n_0.2mm_PLA_MK4IS_1h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.08 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 1.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) for vintage Post Office (PO) Box Door.
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 149
- Makes
- 0
- Views
- 1,747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Mini United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) that uses a vintage Post Office (PO) Box Door. Can be used as a mail holder, change bank, or display piece.
The back piece is not completely symmetrical. The side with slightly longer distances to the notches goes to the top. When it is correctly placed in, the bottom of the back should be flush with the bottom of the sides.
The foot locks are something I was considering using, but chose not to print for my model.
I stuck all the pieces together with a small amount of super glue.