Counting matching models…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
Desk size model of United States Postal Service mail bins. Can be used for desk objects such as business cards or candy
Grumman LLV (long life vehicle) I've finally figured out how to model the interior so it doesn't need supports. I plan to revise my other previous models to make them easier to print. This print doesn't take too long or use too much…
A simple USPSA target for dry fire practice. *If you use this with a real weapon make sure it's unloaded. Matter of fact follow Coopers rules! I take no responsibility for stupidity or negligence. ALL GUNS ARE ALWAYS LOADED NEVER LET THE…
A go/no-go gauge for 141.25 mm and 171.25 mm magazine lengths for various classes of USPSA competition. See here for proper use. Prints on a 180x180mm (Prusa Mini+) bed at 45 degree rotation. Recommended layer height of 0.2 mm.
I remixed Ronald Cauldillo's excellent step van model into a mail truck. I leave these in my mailbox for the letter carrier at Christmas. Consists of 13 stl's. Can be printed all at once, or the body and the tires/windows separately. I…
(4) M3 x 4mm x 5mm inserts (4) M3 x 12mm screws (1) 25mm magnet, 4mm mounting screw. I went with a covered ~30lb strength
Miniaturized target for dry fire practice at home. Target mounts into a single or dual bracket configuration. I put the brackets in a cheap telescoping tripod / selfie stick from Amazon - makes adjusting height super easy. Target is blank…
Click Here for a link to the item this is designed for so you can compare Classic USPS Mail Truck is now available for your Jiabaile 1:43 RC car! Inspired by the legendary Wheelie Yellow Printed with Inland PLA+ Here is a link to the…
Mini United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) that uses a vintage Post Office (PO) Box Door. Can be used as a mail holder, change bank, or display piece. The back piece is not completely…
USPSA target model at 1:6 scale. Zones A, C, and D. It can be used as a template/stamp to make dry-fire targets from cardboard. For 1:3 scale 200%, for 1:4 - 150%, for 1:10 - 60%. Edit it online https://www.tinkercad.com/things/exZFxWmPk3z
I ONLY ship via USPS. Show off your love of the USPS or your mail carrier with this really cool "Love USPS" 3D logo! Make sure to print in two colors to make it pop! Follow me on https://instagram.com/superherodiy Category: Signs & Logos
A simple collapsible measurement box sized to USPSA competition dimensions. Inner dimensions of the box as-printed should be 8 15/16" x 6" x 1 5/8", with tolerances (+1/16", -0"). Note that these pieces are sized to print 41.4 mm high and…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
USPSA Target Stencil by Qwerm A spray paint stencil to make full size USPSA targets from cardboard. Included is the stencil split into various different sizes so it can be print on different sized printers. The stencil can be printed in…
USPSA 1/6 Scale target for dry fire Takes (3) 3x6mm magnets
This KRYDEX USPSA mag holster only fit 1.5-inch belts and couldn't find ones for my thicker 1.75 inch battle belt that I normally use, so I designed my own backing that accommodates thick belts. You'll need 4x 14mm M3 bolts for each back,…
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
Replacement keys for antique United States Postal Service and National Park Service rotary counter locks. Models made from original keys. Scans of original keys provided for reference. There are newer models of the USPS rotary counter…
Adjustable magazine carriers for USPSA/IPSC belt rigs. Mounting to a TekLok-compatible clip (consider the PipClip, also in my designs, for a printable option), they can be adjusted for camber and toe, to allow tuning of wrist and arm…
USPSA target keychain/ bag tag with two alpha hits. Emboss with no more than .4mm lettering to add name, member number, or whatever to the bottom of the delta area. 3 walls anything above 15% infill will be plenty. I've used rectilinear…
Wanted to paint my own targets instead of buying some when I have cardboard laying around everywhere. I used IPSC / USPSA Targets measurements. Yes, there is only the A and C boxes. But, I figured if I am in the D boxes, I need more range…
This is a dispenser designed for 2000 piece 20mm patch rolls made by Eemann Tech. Clearance of 0,2mm for all parts except the locking surfaces which have 0mm tolerance. Would recommend using PETG or ABS/ASA for locking tab durability over…
USPSA target cookies (and/or the cutter) can be used for dryfire practice. Give it to Santa first. PLA while food safe, if non-sealed, shall be discarded after the use. See also…
A handy device for checking letters before you send them. Anything that doesn't fit through the slot doesn't qualify as a letter and will need extra postage, going either as a large envelope ("flat") or as a parcel. See the Domestic Mail…
Building conversation pieces: several parts for USPSA addicts. Having 4070, 6141, 3941 (as well as, 30132 and 92738) on hands might be useful. See https://printabrick.org/ if not. Category: Toys & Games
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Rulebook internal dimensions for the box 8 15/16” x 6” x 1 5/8” 8.9375 x 6 x 1.625 in 227.0125 x 152.4 x 41.275 mm…
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
A right hand and right foot silhouette. both are 3/8" thick. The foot has a spine with reinforced holes for long nails up to 1/2" diameter and large chamfers to help the head sit below flush as well as channels to aid in removal. The hand…
Adapter for the target stand to accept Dimensional 1x2 lumber (Actual Size, 3/4 inch thick by 1 1/2 inches wide)
This truck needs no support. It has a hole in the top for the wire hook. If ambitious, you can paint the lettering and/or the USPS Logo. The logo and small print are better suited for printing with an AMS, if you have one.
It is a model of a usps truck. The wheels do not move.
Just a box to help stop quick rip and pull theft from USPS Small Flat Rate Boxes
Cut List (all emt sourced must be 3/4 Trade size (Nominal .922) I gotr mine from home depot or lowes 4× 3/4 in EMT legs: 10 1/4 in each 1× 3/4 in EMT center tube: 18 7/16 in 2× nominal 1×2 wooden target sticks: cut to desired target…
This is a cover for “Krydex” style magazine holders available online and used for shooting competitions like IPSC, USPSA, IDPA, ASI. They are printed in PLA in three colors (No AMS required) using a 0.2mm layer height and swapping the…
This is the art from the last USPSA Major Match I ran in 2019. I had the Adobe Illustrator file, and exported the 3 color layers into .svg format, and imported into TinkerCad to do some layer masking to create stl files for doing a…
USPSA magnetic targets 3"x6" w/ 2x 1.5mm x 10mm magnets in the back. Great for decoration or further training of transition and acquisition. These are originally printed in PETG and even though the magnet pockets are slightly oversized…
A handy device for checking letters before you send them. Anything that doesn't fit through the slot doesn't qualify as a letter and will need extra postage, going either as a large envelope ("flat") or as a parcel. See the Domestic Mail…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
This is a cover for “Krydex” style magazine holders available online and used for shooting competitions like IPSC, USPSA, IDPA, ASI. They are printed in PLA in three colors (No AMS required) using a 0.2mm layer height and swapping the…
This is an addition to the standard USPSA targets I have posted. Tons of customization to your dry fire setup. Can have these mounted basically anywhere and can even mount them together to get creative with it…
