KRYDEX USPSA 1.75-inch Belt Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The KRYDEX USPSA mag holster backing to fit thicker 1.75-inch battle belts!
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 103
- Makes
- 0
- Views
- 817
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This KRYDEX USPSA mag holster only fit 1.5-inch belts and couldn't find ones for my thicker 1.75 inch battle belt that I normally use, so I designed my own backing that accommodates thick belts.
You'll need 4x 14mm M3 bolts for each back, as well as 4 x M3 nuts. (since the back is now longer/thicker the original screws won't work)
I suggest using a bit of blue Loctite on the bolts but it is pretty tight as it is so up to you!
Printed in PLA+ at least, 4+ walls, 0.2mm layer height, 100% infill, support on build plate only for the nut holes on the bottom.