31 models
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
A simple USPSA target for dry fire practice. *If you use this with a real weapon make sure it's unloaded. Matter of fact follow Coopers rules! I take no responsibility for stupidity or negligence. ALL GUNS ARE ALWAYS LOADED NEVER LET THE…
A go/no-go gauge for 141.25 mm and 171.25 mm magazine lengths for various classes of USPSA competition. See here for proper use. Prints on a 180x180mm (Prusa Mini+) bed at 45 degree rotation. Recommended layer height of 0.2 mm.
(4) M3 x 4mm x 5mm inserts (4) M3 x 12mm screws (1) 25mm magnet, 4mm mounting screw. I went with a covered ~30lb strength
Miniaturized target for dry fire practice at home. Target mounts into a single or dual bracket configuration. I put the brackets in a cheap telescoping tripod / selfie stick from Amazon - makes adjusting height super easy. Target is blank…
USPSA target model at 1:6 scale. Zones A, C, and D. It can be used as a template/stamp to make dry-fire targets from cardboard. For 1:3 scale 200%, for 1:4 - 150%, for 1:10 - 60%. Edit it online https://www.tinkercad.com/things/exZFxWmPk3z
A simple collapsible measurement box sized to USPSA competition dimensions. Inner dimensions of the box as-printed should be 8 15/16" x 6" x 1 5/8", with tolerances (+1/16", -0"). Note that these pieces are sized to print 41.4 mm high and…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
USPSA Target Stencil by Qwerm A spray paint stencil to make full size USPSA targets from cardboard. Included is the stencil split into various different sizes so it can be print on different sized printers. The stencil can be printed in…
USPSA 1/6 Scale target for dry fire Takes (3) 3x6mm magnets
This KRYDEX USPSA mag holster only fit 1.5-inch belts and couldn't find ones for my thicker 1.75 inch battle belt that I normally use, so I designed my own backing that accommodates thick belts. You'll need 4x 14mm M3 bolts for each back,…
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
Adjustable magazine carriers for USPSA/IPSC belt rigs. Mounting to a TekLok-compatible clip (consider the PipClip, also in my designs, for a printable option), they can be adjusted for camber and toe, to allow tuning of wrist and arm…
USPSA target keychain/ bag tag with two alpha hits. Emboss with no more than .4mm lettering to add name, member number, or whatever to the bottom of the delta area. 3 walls anything above 15% infill will be plenty. I've used rectilinear…
Wanted to paint my own targets instead of buying some when I have cardboard laying around everywhere. I used IPSC / USPSA Targets measurements. Yes, there is only the A and C boxes. But, I figured if I am in the D boxes, I need more range…
This is a dispenser designed for 2000 piece 20mm patch rolls made by Eemann Tech. Clearance of 0,2mm for all parts except the locking surfaces which have 0mm tolerance. Would recommend using PETG or ABS/ASA for locking tab durability over…
USPSA target cookies (and/or the cutter) can be used for dryfire practice. Give it to Santa first. PLA while food safe, if non-sealed, shall be discarded after the use. See also…
Building conversation pieces: several parts for USPSA addicts. Having 4070, 6141, 3941 (as well as, 30132 and 92738) on hands might be useful. See https://printabrick.org/ if not. Category: Toys & Games
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Rulebook internal dimensions for the box 8 15/16” x 6” x 1 5/8” 8.9375 x 6 x 1.625 in 227.0125 x 152.4 x 41.275 mm…
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
A right hand and right foot silhouette. both are 3/8" thick. The foot has a spine with reinforced holes for long nails up to 1/2" diameter and large chamfers to help the head sit below flush as well as channels to aid in removal. The hand…
Adapter for the target stand to accept Dimensional 1x2 lumber (Actual Size, 3/4 inch thick by 1 1/2 inches wide)
Cut List (all emt sourced must be 3/4 Trade size (Nominal .922) I gotr mine from home depot or lowes 4× 3/4 in EMT legs: 10 1/4 in each 1× 3/4 in EMT center tube: 18 7/16 in 2× nominal 1×2 wooden target sticks: cut to desired target…
This is a cover for “Krydex” style magazine holders available online and used for shooting competitions like IPSC, USPSA, IDPA, ASI. They are printed in PLA in three colors (No AMS required) using a 0.2mm layer height and swapping the…
This is the art from the last USPSA Major Match I ran in 2019. I had the Adobe Illustrator file, and exported the 3 color layers into .svg format, and imported into TinkerCad to do some layer masking to create stl files for doing a…
USPSA magnetic targets 3"x6" w/ 2x 1.5mm x 10mm magnets in the back. Great for decoration or further training of transition and acquisition. These are originally printed in PETG and even though the magnet pockets are slightly oversized…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
This is a target stand I made for 1x2 furring strips. It was inspired by this model from CitizenGreyArms: https://www.thingiverse.com/thing:5448274 The only functional differences are my part is more light duty, uses about half the…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
This is a cover for “Krydex” style magazine holders available online and used for shooting competitions like IPSC, USPSA, IDPA, ASI. They are printed in PLA in three colors (No AMS required) using a 0.2mm layer height and swapping the…
This is an addition to the standard USPSA targets I have posted. Tons of customization to your dry fire setup. Can have these mounted basically anywhere and can even mount them together to get creative with it…
