Cap-Pack Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 6 position capacitor plate for RC cars/trucks
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a simple plate to mount my capacitors upon for my RC cars and trucks
In this case it is designed for 6 capacitors
I used these capacitors in my case and plate is spaced for this size: https://www.amazon.com/gp/product/B073YPQQ5F/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1
It seems to hold up well using the settings in the gcode file and handles heat well when soldering. I pre-tinned everything involved before applying solder once caps were seated. I also soldered the XT60 onto the wire beforehand to reduce heat transfer into PLA
I used a small drop of hot glue to hold the caps into place as I mounted them so they do not wiggle around.