Cap-Pack Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 6 position capacitor plate for RC cars/trucks
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a simple plate to mount my capacitors upon for my RC cars and trucks
In this case it is designed for 6 capacitors
I used these capacitors in my case and plate is spaced for this size: https://www.amazon.com/gp/product/B073YPQQ5F/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1
It seems to hold up well using the settings in the gcode file and handles heat well when soldering. I pre-tinned everything involved before applying solder once caps were seated. I also soldered the XT60 onto the wire beforehand to reduce heat transfer into PLA
I used a small drop of hot glue to hold the caps into place as I mounted them so they do not wiggle around.