Raspberry PI 4 Holder for Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.59 – €0.73 net (excluding VAT)
For file: PI-Case-Mount-Body_0.4n_0.2mm_PETG_MK4IS_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 31.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A snap on holder for a full aluminum cooling case.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html
Prints without Support. Recommend 3 perimeters and 20% infill.
Only needs two M3 Screws and nuts to mount to the original prusa enclosure.