1 / 3
Voron Switchwire Auxillary Fan (Dual 5015s)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use two 5015 fans to power this Aux fan for your Switchwire
- Rating
- 0 / 5
- Likes
- 67
- Downloads
- 162
- Makes
- 0
- Views
- 1,822
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Adjustable auxiliary fan that helps improve your part cooling and thus allows you to print faster (PLA for example). I mounted mine using two modified “z_bearing_blocks" which are included using the adjustable height v2 lid which incorporates the Keyback retention. If you need some help or adjustments made, please feel welcome to comment and @ me so that I get notified.
Recommended settings:
- PTEG (ABS / ASA preferred) for the fan housing to help hold up to any heat coming off the bed. PLA will work, but will eventually warp over long term use.
- PLA+ is fine for the lid.
- 15% Gyroid infill and 0.2 layer height is what I used and can verify works well