1 / 9
JGAurora A5X Standalone Kit *Mod*
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Standalone Kit from Rics3D is great but some minor things on the parts I fixed for my needs to improve the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Standalone Kit from Rics3D is great but some minor things on the parts I fixed for my needs to improve the Standalone Kit. Modifications are:
- Feets for the printer base increased the hight by 30mm to improve accessability of the printer from below and to ensure better ventilation on the parts
- I used an MKS TFT32 instead of the default MKS TFT28 and therefor added the correct holder with screw holes and further I lowered the holder. The original holder for me is a way not stable enough.
- I redesigned the complete MKS Gen L holder. Added another screw support to the middle V-slot profiles and also changed the mount of the 120mm fan so one side is fixed on the mount and only one side need to be screwed on. Much more stable than the original version.
Have fun
Print Settings
Printer:
JGAurora A5X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
30-60%
Filament:
Redline PLABlack / irongrey
Category: 3D Printer Parts