Garden Hummingbird Wind Spinner
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.74 – €3.35 net (excluding VAT)
For file: hummingbirdcolors_0.2mm_PETG_MK3SMMU2S_2h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.05 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 2.82 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A wind spinner that shows a Hummingbird collecting nectar out of a flower
- Rating
- 5 / 5
- Likes
- 126
- Downloads
- 528
- Makes
- 6
- Views
- 3,825
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I love wind spinners. I made this one of a Hummingbird collecting nectar from a flower to put in my garden.
I have provided two models. The first one can be printed in white PETG and then colored with Sharpie color pens. The second model requires the MK3S with the MMU2S so you can print the four colors (white, black, green, and red) at the same time.
Assembling the flower spinner:
There are five petals that superglued into the flower trumpet hub
Assembling the spinner shaft:
Super glue is used to attach the flat section of the shaft to the Hummingbird body. I use clothes pins to hold the shaft while the glue dries. The 10mm spacer is moved down the shaft about 30mm from the end.
Mounting the flower spinner:
The flower spinner is slid onto the shaft with the flower trumpet facing the Hummingbird. The end cap should fit onto the end of the shaft. The spinner should spin freely. When adjusted correctly, put a drop of super glue on the 10mm spacer and the endcap.
Mounting Pole:
I've included a model for the mounting shaft, but I have found that they tend to be too flexible in high winds. The 6mm carbon fiber rods ( https://amzn.to/3hCsY4L ) are much better.
As an Amazon Associate I earn from qualifying purchases.