Lithophane Display / Stand / Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lithophane lamp / display for a single 3:4 Lithophane
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Nice way to show your lithophane.
Settings:
Layer Height: 0.2
Infill 15%
No Supports
Modeled for the IKEA KAPPLAKE lamp.
Lithophane creator: Curved Lithophane Maker
Lithophane Settings:
Frame Option: Frame on Top and Bottom
Lithophane Resolution: 0.2
Lithophane Height: 116
Angle: 100
Frame Width: 3
Frame Height: 3
Overhang Angle: 45
Maximum Thickness: 3
Minimum Thickness: 0.8
This should result in a lithophane that is 76.75 x 19.82 x 116 in size in the slicer.
IMPORTANT: In the slicer you have to cut off the top frame to make it a borderless picture except on the bottom where you want a nice base to stand on in the stand, this should result in a ~113mm tall piece.