1 / 19
Meanwell ERPF 400 PSU DIN Rail Plate — image 1
1 / 19

Meanwell ERPF 400 PSU DIN Rail Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIN Rail Mounting plate for Meanwell ERPF 400 series PSU

Rating
0 / 5
Likes
2
Downloads
27
Makes
0
Views
294
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I needed a mounting solution for a Meanwell ERPF 400 24 PSU, for my Ender 3.

I chose DIN mounting for as cleaner setup but lacking a ready made plate or even screw holes on the PSU case, I drew one up from scratch.

There are 2 versions - v1, the prototype - currently mounted on the E3 and v2 - the close refinement - not yet mounted, I'll do it in probably a couple of months.

The V1 is meant to take M3 heat inserts and also it's meant to works with DIN Rail Bracket - Heat Insert Version -  62.5mm - DIN Rail Bracket - Heat Insert Version - 52.5mm & 62.5mm by mmuellerphoto | Download free STL model | Printables.com.

V2 is built on the same principle.

Both mount to the bracket with M3x15mm screws - pictures.

 

V1 is not meant for the printer to be upside down.

V2 could manage that since it's tailored with a top brace securing the PSU to the plate.

The brace is meant to take 4 M3x10 mm countersunk screws - directly to the plastic, no inserts.

Print specs - these should be tailored to your printer, below you find mine:

Material - PETG

Nozzle - .4 brass

Layer height - .16

Layer width .4

 

All files are free and available on OnShape - free to use, remix, replicate - not for commercial use of any kind.

 

Tags