Dell PERC H310 HBA PCIe bracket (full length)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple full-length PCIe bracket for the Dell PowerEdge H310 HBA / RAID controller
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 101
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a simple full-length PCIe bracket for the Dell PowerEdge H310 HBA / RAID controller.
I mounted the card to the bracket with two short M3 bolts and nuts, but you can also use an M4 bolt and screw directly into the plastic.
With some case and mainboard combinations, the end that points towards the mainboard might be too thick, but it can be trimmed down easily with a pair of side cutters.
Print Settings
Material: PLA worked fine for me, may want to consider a higher temp alternative tho
Supports: Enabled, support enforcers only (see slicer screenshot)
Orientation: Place part in slicer with the card mounting tabs touching the bed for optimal print quality