(improved version) Prusa X-axis motor cable holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.34 – €0.42 net (excluding VAT)
For file: Prusa X-axis motor cable holder improved_0.2mm_PET_MK3S_28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 28.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Reduces strain on the cable
- Rating
- 4.714 / 5
- Likes
- 19
- Downloads
- 146
- Makes
- 9
- Views
- 1,187
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Removes the strain on the cable.
This design consist of two parts, a cable holder and a motor mount, and is easy to assemble.
Slide the cable holder into the motor mount and fix it to the motor using a M3x10 hex screw. The cable is secured using a cable-tie.
Print instructions
I printed this using 0.2 mm layer height, 4 perimeters and 20% infill.
STL file is included if you want to use different settings.
If you like what I'm doing…
…please consider buying me a coffee
