1 / 3
Family of Gasketed 4" x 6" Cases — image 1
1 / 3

Family of Gasketed 4" x 6" Cases

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Family of Gasketed 4" x 6" Cases in four different depths: 1.18", 1.58", 1.97" and 2.36"

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Print four each of the side and corner spacers. The screws can either be M5x25 or 10-32 x 1" and ideally are binding head to eliminate need for washers topside. Ideally the gasket would be a dash -164 O-ring with a nominal ID 0f 6.25" and a thickness of .103" (McMaster Carr P/N 1173N461) in 50 Shore A Durometer silicone. The nuts are preferably self-locking. The only caveat I make for the design is that the little spacers would ideally be made out of aluminum for strength. Cover files are provided with and without my logo.

Tags