Aeroscout / RC plane Ceiling Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount for the Aeroscout or similar RC planes with optimized layer orientation.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 444
- Makes
- 4
- Views
- 2,964
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This mount only requires 1 screw in the ceiling and consists of multiple parts that can be printed flat to optimize layer orientation.
I found other RC plane mounts lacking because either their hole spacing required mounting into drywall instead of studs or because their print orientation puts a cantilever force perpendicular to the layer lines. Personally, I don't trust my planes to drywall anchors or layer adhesion. So I created this model as the solution.
To join the pieces, you will need 4x m3x20 flat-head machine screws and 4x m3 nuts. A 2-in wood screw works well to secure the base plate to any ceiling stud.
I recommend PLA, 15-20% infill, printing each model flat on the build plate, increasing bed temp to 70c, and using a brim.