1 / 2
Rancilio Silvia steam knob bushing / grommet for 22mm hole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reduce the wobble of steam knob on my espresso machine. All models I found had wrong diameter for my machine.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a trivial model to reduce the diameter of the hole that a steam knob goes through. I printed it in TPU and it fits very easily.
I made the lip that goes on the other side of the front so small that I suspect a stiffer material like PETG or even PLA could work too but I have not tested them. Drop a make if you tried :)
Printing:
No supports are necessary if you use the classic perimeter generator. The Arachne will try to start printing the lip overhang in the air—see the last picture.