Rancilio Silvia steam knob bushing / grommet for 22mm hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduce the wobble of steam knob on my espresso machine. All models I found had wrong diameter for my machine.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is a trivial model to reduce the diameter of the hole that a steam knob goes through. I printed it in TPU and it fits very easily.
I made the lip that goes on the other side of the front so small that I suspect a stiffer material like PETG or even PLA could work too but I have not tested them. Drop a make if you tried :)
Printing:
No supports are necessary if you use the classic perimeter generator. The Arachne will try to start printing the lip overhang in the air—see the last picture.