Car beverage holder adapter for 0.33 and 0.5 litre bottles and cans (Dacia Duster and many others).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptér držáku nápojů do automobilu pro láhve a plechovky o objemu 0,33 a 0,5 litru.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 155
- Makes
- 0
- Views
- 1,600
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
EN:
The cup holder adapter is designed for the Dacia Duster, but will also be used in many other vehicles. It simply slides into the 1.5 litre holder in the centre panel in front of the rear seats and, depending on which side you insert it, it can be used for bottles and cans 0.5 litres or 0.33 litres. The slats around the adapter ensure a secure insertion so that the adapter does not resonate when driving. Print without supports. The outer diameter is (thanks to the flexible slats) from 80 mm up to a maximum of 90 mm, the inner diameters are 70 and 60 mm, the height is 77 mm.
CZ:
Adaptér pro držák nápojů je sice navržen pro vozidlo Dacia Duster, ale bude použitelný i v celé řadě jiných vozidel. Jednoduše se zasune do 1,5 litrového držáku ve středovém panelu před zadními sedadly a podle toho, kterou stranou ho zasunete, je použitelný pro láhve a plechovky o obsahu 0,5 litru nebo 0,33 litru. Lamely okolo adaptéru zajišťují spolehlivé zasunutí tak, aby adaptér při jízdě nerezonoval. Tiskne se bez použití podpor. Vnější průměr je (díky pružným lamelám) od 80 mm až do max. 90 mm, vnitřní průměry jsou 70 a 60 mm, výška je 77 mm.