1 / 2
Plastic handle for Southord lockpick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enhance a southord lockpick with a plastic handle, so it can be held more comfortably.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 86
- Makes
- 1
- Views
- 738
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thin version is thinner by 1mm.
Gluing
The snap fit is good enough to hold both part together. But if you slightly bend the tool, they separate.
I used acetone for gluing for PLA or ABS prints.
- Insert lockpick into core part
- Apply acetone on inner walls between the lockpick and the print. Use pipette or similar tool for using the precise amount of the liquid.
- Snap in the cover print. Use pliers if necessarily.
- Let it dry.
- TIP: Acetone leaves marks on PLA prints. Use it carefully.