Hexalight - exagonal nanoleaf replica no soldering & support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular nanoleaf replica hexagonal fully scalable and no soldering required
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 230
- Makes
- 3
- Views
- 2,542
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an original artwork that takes inspiration from nanoleaf projects.
My twins loved Hexagonal-Alexa enabled - light so I elaborated this model in thinkercad and prepared with several trials&errors
About the model itself:
@ it has 2 passages on each side for led strip setting but also for heat dissipation
@ you can combine as much hexagons as you want
@ fixing hangs are provided in order to lock hexagons each other
@ use one (or more) of the holes present in each angle for hang the light
@ any lightstrip will be fine but the thinner and power saving & cool ones are recommended the best it is. Lightstrip may be glued on internal perimeter of Hexagons
One exagon need 2 hours and 38 min at 0.3 mm while for a couple of hangs at 0.2 mm it takes about 12 minutes. Print on metal sheet in order to get better results.
REMEMBER TO READ THE DISCLAIMER: this is a work in progress . Keep controlled lamps , leds and whatever you connect to electrical power as all this stuff may in certain conditions leading even to fire ignition or electrical shock . I'm not responsible for any possible damage, use at your own risk.