1 / 13
Slightly overbuilt paper towel roll mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount paper towel holder
- Rating
- 4.5 / 5
- Likes
- 33
- Downloads
- 67
- Makes
- 3
- Views
- 989
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
You will need:
3x 608 skateboard bearings
2x M8-1.25 x 40mm Socket head cap screws
1x M8-1.25 nut (preferably nylock)
3x Either M6 30mm button head bolts or 1/4-20 x 1.25" button head bolts
3x Either M6 nuts or 1/4-20 nuts (preferably nylock)
4x #8 x 3/4" screws to attach wall mounts to the clamp (I used 10-32 flat head bolts and tapped the holes but you do you)
6x #8 screws to attach to wall/whatever
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Only on “Rocker” part everything else is fine
Resolution:
200
Infill:
20
Filament:
amazon basics PLA
Category: Household