TZ Tape Caddy for Multiple Sizes
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.76 – €11.93 net (excluding VAT)
For file: tz tape 6x12 3x18 on 3x5 base_0.4n_0.3mm_PLA_MK4_8h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.85 excluding VAT (range midpoint).
- Weight reported by the author
- 182 g
- Print time reported by the author
- 8.63 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A caddy that holds TZ or TZE tape cartridges. You can have N slots of one size, then M slots of a different size.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 116
- Makes
- 0
- Views
- 649
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This a cartridge caddy for Brother P-Touch TZ and TZE tapes. It has been modified to have cartridge slots of two different sizes. The OpenSCAD file allows you to customize the number of slots and their respective sizes. This all sits on a GridFinity 3x5 base. The STL file has 6 slots that fit 9mm or 12mm tape sizes (they both use the same size cartridge), and 3 slots that fit the 18mm tape size.
The GridFinity base was built from GridFinity Rebuilt OpenSCAD files as a 3x5 bin with 0mm interior wall height.
Project inspired by https://www.printables.com/model/281427-gridfinity-brother-p-touch-tz-tze-label-tape-holde
Printer
Prusa MK4
Nozzle
0.4mm
Layer Height
0.3mm (DRAFT)
Infill
15%
Material
PLA