1 / 1
Ikea Kallax Coat Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts to an Ikea Kallax bookshelf, adds a rod for use as a coat rack!
- Rating
- 0 / 5
- Likes
- 78
- Downloads
- 110
- Makes
- 0
- Views
- 1,049
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
I wanted to add a coat rack to the side of my Ikea Kallax bookshelf, so I designed this! It fits on either the left or right side of a Kallax, and mounts without any modification to the Kallax.
Prints without supports if you print with the flat sides oriented down on the build plate. Increase the perimeters and use a tough filament for extra strength. I printed with ABS, but PETG will probably do. Layer height doesn't matter - 0.30mm for speed.
A mirrored file is provided for convenience. Print one of each!
You will also need:
- ¾" x 15" wooden dowel
- 2 wood screws