4Max Pro New Head Limit X and Flex cable support (New V5)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi, New V5 released: a little bit smaller because the flex cable was a bit too tight at the limit x: max / y: 0…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
New V5 released:
- a little bit smaller because the flex cable was a bit too tight at the limit x: max / y: 0
- protection of the flex cable closer to the head because it touches in abutment with another flex rear support Lucdu19 : https://www.thingiverse.com/thing:4088111
- better pinch flex cable
(see pictures)
Updated V4 final:
- added better support for flex cable
- gradient support for Flex cable ,do not touch axis X now (see picture)
- a little bit longer limit X
- ABS print 100% infill
Here is my first object drawn under Fusion 360 for 4Max Pro.
I saw that some had also removed the protective shell to also have better ventilation and tinkered with a wedge glued on the engine step by step to keep the limit X.
This support makes it possible to keep the limit of the X axis as well as to maintain the connection sheet as the original support while keeping the extruder and the fans easily accessible.
It is fixed by 2 of the 4 screws of origin.
I also lightly sand the slit of the tablecloth to avoid wear friction
P.S: photos of my prototype printed in 0.2 50mms
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.16 / 0.2
Infill:
100%
Filament: anycubic ABS
Category: 3D Printer Parts