Counting matching models…
This is a design for conversion of the Anycubic 4Max Pro printer to Core XY setup. It requires a handful of printed parts and purchase of some hardware to complete. Included within this design are files for: Build guide 3D files for…
I modded the original STL (the model itself is not perfect, but works) for a better cooling and to avoid melting and deformation due to high temperature during ABS prints. Use ABS for this, not PLA. Category: 3D Printer Parts
Description A Circular Fan Duct adapted for the Anycubic 4Max Pro. I tested many fan ducts here in Thingiverse, no one reached a better quality then this one!. Get your own picture of the results. How to Print Just print it with your…
A hinge to easily remove the door of the Anycubic 4MAX or DIY closed chamber. There are two STL-files, one with the needed spacer (4MAX) already attached (incl) and one with the spacer separated (sep). A closed door is not always better…
This adapter plate is designed to mount a skr 1.3 controller board to the original mounting location of a trigorilla controller board and to maintain the original position as good as possible. The adpater board is designed for the…
Check out if your bed is good levelled. Print Settings Printer: 4Max Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category: 3D Printing Tests
Still in Progress! Maybe one of the best fan cooler in the 3D printer world modified for the 4Max Pro. Print Settings Printer: 4Max Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20 Category: 3D Printer Parts
Cover for the power supply switch of Anycubic 4max pro and pro2 This is to prevent dust and filament to get into the powersupply at the line voltage switch. --------------------- Abdeckung für den Netzspannungs-Umschalter am Netzteil…
This is an upgrade I designed for the Anycubic 4MAX 3D Printer. It adds a better viewing angle, and you can insert/remove the SD Card without opening the door. The 4MAX is an awesome 3D printer, but I was having interference issues with…
Habe meinen Anycubic 4Max Pro auf einen Mellow BMG Wind Extruder mit Volcano Hotend umgebaut. Jetzt druckt er sehr zuverlässig. Benötigt wird für diesen Umbau dieser Alu-X-Schlitten:…
A Vibration Damper made for the Anycubic 4Max Pro. Also reduces the Jerk noises of the printer. Version 1.1 Stabilization improvements Category: 3D Printer Accessories
Because i was not happy with the original filament support, i built my own one. I suggest to take a 10mm Rod (aluminium, iron,...) as core for the filament roll holder. You can also print the other version of the holder (Endstück, Stange,…
I use an alternative spool holder and wanted to cover the remaining hole of the stock spool holder. Fits for 4max pro 2 and the original 4max pro. --------------------- Ich nutze einen alternativen Spulenhalter und wollte das Loch vom…
This is a E3D V6 bowden upgrade for the 4Max printer with a 40mm cooling fan for the cold zone and a 50mm radial fan for the cooling. You will need a few 3 and 4mm bolt to put it togather. Update 29/09/2018 V2.3 the radial fan has been…
KISS (Keep it simple stupid) Duct for ANYCUBIC 4Max Pro. Minimum size. Better cooling. Low Heater block Temperature drop. at Use. Set "Initial fan speed" and "regular fan speed" to prevent the duct melting. Print Settings Printer Brand:…
NOTE: This is still beta - it already fully usable but still needs a little more polishing This mod allows you to use an E3D Titan Extruder including E3D V6 or Volcano Hotend on your Anycubic 4Max Pro. It is non-destructive, so you can…
One Part from each remixed Fan Duct joined with tinkercad, to cool the printing part from 2 sides. 4Max Pro Duct Mix-3.stl is now the corrected Version. The first and second version had litte errors ;) Print Settings Rafts: No Supports:…
One part is based on this https://www.thingiverse.com/thing:5198158 but i found it too much rigid to work properly, and it gives some movement impediment. The 4Max Pro 2.0 has a problem in Z axis. It results in imprecisions during small…
bumper is for sensorless homing and can also be used as endstop switch mount. the “probe mount” is a fun experiement to use a cherry red switch as bed leveling sensor, it kind of works. led case uses cover from disassembled cheap usb light.
Print parts at last in PETG, or better in ABS - ASA. You will need 1x M3 10mm and 1x M3 8mm. If you use this spool holder https://www.thingiverse.com/thing:2451368 you can put the spool into the chamber, using the heat of the chamber…
This is a case for the ESP32 Cam to hang inside of an Anycubic 4Max Pro. The Firmware is taken from here: https://github.com/luc-github/ESP3D From the GitHub site: This firmware allows not only to have a cheap bridge between Wifi and…
Just a simple spool holder for the Anycubic 4MAX. This spool moves the filament roll forward giving full clearance on the back side. The tube is hollow and tapered, so, no supports are needed. Use the spacer between spool holder and 2020…
I won't provide instructions about how to install the BLTOUCH on the 4MAX Pro. After all it is almost the same as for the Anycubic i3 Mega. This construction holds the cables of your in printhead installed BLTouch/3DTouch Sensor. Print…
A miniature of the Anycubic 4Max Pro as a Filament Cleaner Print Settings Printer: 4Max Pro Rafts: No Supports: No Resolution: 0.1 Infill: 100 Category: 3D Printer Accessories
A filler strip to prevent the possibility of the ribbon cable getting damaged on the Anycubic 4Max Pro 2.0. Mounted mine with a magnet to the rear support, but adhesive would work also.
Shroud for bimetal heatbreak. Print it in ABS. Bimetal heatbreak here https://s.click.aliexpress.com/e/_9wktxb Category: 3D Printer Parts
For Anycubic 4max pro printer! My Y axis synchronisation rod keeps on falling out so I designed this part to close it inside its space, there is still about 1mm left for the rod to travel but it won't fall out. You need 2 pieces for both…
Combined top & bottom plate from PrintBreakRepeat's original design. Results in a much sturdier part when printed with an SLA machine. Added a little extra clearance for the hot end fan port. DO NOT PRINT USING AN FFF PRINTER. Use…
English* =========== Filament spool holder for Anycubic 4Max Need: 5x screws 3x16mm Spool internal diameter 45mm and 52mm Filamenthalter_2v3_4Max_i3mega_V3.stl = 52mm internal diameter Filamenthalter_2v3_4Max_V2.1_lang.stl = 45mm internal…
This is a mount for a Titan Aero on the stock carrier, including stock fan mount and its duct. The fan mount is attached to the main mount using 3M dual lock for quick duct swaps. Including Fusion 360 files if someone wants to improve the…
This is redesigned spoolhoder for 4max printer, it holds without any problem 1kg filament roll. I made it longer for wider spools, just like in original holder use 608 skateboard bearing. Its a tight fit so do not worry and use small…
Heat-Sink duct & Parts cooling duct set for ANYYCUBIC 4MaxPro More cool air far from heat bed for Heat-Sink. More high flow for parts cooling. Category: 3D Printer Accessories
English* =========== Mount for 4Max - E3D V6 Clone Hotend I'm still testing the mount and the dust (installed on 3 printers since december/january). Support only needed when the printings overhang is bigger than 70° from the bottom. For…
i like the original idea for the makerbot Replicator 2 series by UoBQuantumMatter nice work, but do not fit at all on my 4MAX so i re did the model from scratch using FreeCad. For installation i use the same screw that hold the front…
Changed connector on the meganever2 BTT SFS mount to SilencedFrost UBBI connector. The mesh looks bad, because I had to remesh it, but it's printable and it works perfectly. Print - Related Settings →…
It is a very simple lock, used to refurbish a 4max printer. Uses an M3 screw
J'ai créé un canal de ventilation pour extraire l'air chaud venant du caisson et qui est soufflé sur la carte mère. Avec ce canal. l'air chaud est évacué sur l'extérieur avec juste une petite découpe dans le capot inférieur, rien de…
English* =========== Filament dualspool holder for Anycubic 4Max Need: 10x screws 3x16mm, 3x M4 nut, 3x M4x10mm screws, 2x M4x20mm, 2x M4 T-nut(2020) Spool internal diameter 45mm Deutsch* =========== Doppel-Filementspulenhalter für…
This is a Webcam holder for the "Wansview 1080P" on Anycubic 4Max pro door. The webcam is avaiable for very cheap (got mine for ~10€ on Amazon , but even for the normal price ~20€ it is OK. You need to remove the original housing from the…
English* =========== Filament Mobius-extruder holder for Anycubic 4Max For Mobius2 and Mobius3 You can print dumper whit TPU Deutsch* =========== Doppel-Mobius-Extruder-Halter für Anycubic 4Max Für Mobius2 und Mobius3 Dämpfer werden mit…
i made the spool holder for my delta and loved that item Original Spool Holder: https://www.thingiverse.com/thing:2082483 on the 4max the original mount didnt fit so i designed a smaller one Ramon Seda allowed me to publish this smaller…
remix of Rabuki work on 4max(thanks): https://www.thingiverse.com/thing:3985337 probe like this: https://www.amazon.fr/dp/B076CZG6HX/ref=cm\_sw\_r\_em\_apa\_i\_P9BTTPPFWNMVTPVRBCJ5?\_encoding=UTF8&psc=1 Print Settings Printer: 4maxpro…
Improvement over the original for a tighter fit and resolve clearance issues with the Neptune 4 max print bed.
Anycubic 4Max Ecken für Magnetplatte
Anycubic 4Max X-Achse für Prusa Extruder Material erforderlich für den Umbau: 4x Lager LM8UU + 3 weitere für den Extruder 1x Bearing housing 623h oder vergleichbarer Pulley mit 3mm Loch 4x M3x10mm Schraube (Lagerhalter) 4x M3 Mutter…
Spulenhalter für Anycubic 4max Spulenhalter wird auf dem Drucker befestigt um den Filamentweg zu verkürzen, es lässt sich an allen 4 Seiten befestigen. Vorne kreuzt es nicht den Kabelweg. Der Halter wird drauf geschoben und mit einer der…
Spacers for y-axis, tolerance is 0.2mm in the inner hole, adjust according to the filament used. Print Settings Printer Brand: Geeetech Printer: Geeetech A10M **Rafts:** No Supports: No **Resolution:** 0,2 Infill: 15 **Filament:** any…
Simple Raspberry Pi mount for the Anycubic 4max Pro 1.0, might also fit the 2.0. Kind of thrown together and not the world's sturdiest thing, but does the job just fine. Cable routing is left as an exercise to the reader, however The Pi…
Hi, New V5 released: a little bit smaller because the flex cable was a bit too tight at the limit x: max / y: 0 protection of the flex cable closer to the head because it touches in abutment with another flex rear support Lucdu19 :…
this is an adaptor for the mobius2 extruder from the Voron-Project ( https://github.com/mzbotreprap/VORON ) adapting to the Anycubic 4Max it fits to the original mounting holes from the filament sensor you can use 1 of 2 options: Version…
Kabelhalter für Anycubic 4Max mit Prusa Extruder Befestigung: 1x M3x8mm Schraube
X-Endstop für Anycubic 4Max mit Prusa X-Achse und Extruder Erforderlich für Montage: Orginal Endstop + Schrauben M2x8mm(enthalten) 1x M3x25mm Schraube 1x M3 Selbst sichernde Mutter 1x M3 Mutter oder alternativ Hülse von der Betthalterung…
A filler strip to prevent the possibility of the ribbon cable getting damaged on the Anycubic 4Max Pro 2.0. Mounted mine with a magnet to the rear support, but adhesive would work also.
