250 MM Mars Lithophane - Complete Sphere
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a larger version of the Mars Lithophane. It is designed to be printed at 250 mm.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 196
- Makes
- 0
- Views
- 855
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
This is a larger version of the Mars Lithophane. It is designed to be printed at 250 mm. You can shrink it but some walls will be too thin to print with out modification. If there are requiests for smaller versions I am happy to modifiy it, but there were already smaller versions available on version sites.
This was printed at 0.08 mm layers. I drilled the hole for the light due to the custom nature of the fixture I was using.
0.08 mm layers
Printed in Matte White
Solid Infill
Printed with supports due to it being a complete sphere. If you want to print it safer then sink the model onto the build plate slightly and print with a brim.
I have also heard that, if you have an enclosure, opening the door to allow more cooling will help the surface, esspecially the early layers.