1 / 3
Staghorn Fern Plaque
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts for a display board for a staghorn fern that catches drips after watering.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 1,013
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a project I did for my girlfriend to hang and display her staghorn fern. The trough catches any drips after watering. Meant to be hung on a single sturdy nail or screw after affixing the printed parts to a backing material.
My Build
- The Polycarbonate sheet I used measures 470mm x 205mm x 8.5mm.
- I glued on the parts using gel CA glue.
- Drilled a hole in the backing material aligned with the one in the knob part using a 3/8" or 10mm bit.
Print Settings
- Printed in PETG at .2mm layer height
- Print the trough as oriented in the STL
No supports - Print the knob rotated so that the knob is pointing straight up
Used tree supports touching build plate only