1 / 2
Spool Shelf Storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Proudly display 30+ filament spools
- Rating
- 5 / 5
- Likes
- 738
- Downloads
- 1,730
- Makes
- 14
- Views
- 9,783
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
Do you have leaning towers of filament in your workspace? Put it on the wall!
Here's everything you need!
- Check that your wall studs are 16" apart and mark them
- Print a full set of brackets (4 pieces) or as many as you like
- (1) end cap left, (2) middle supports, (1) end cap right
- Print at .2mm layer height, 3 walls, 10% gyroid (or beefy 30% triangle)
- Grab (8) #8x1.5" screws, preferably button head
- Pickup (2) 1"x48" dowel rods
Fasten the brackets to the wall ~16" apart and insert dowel rods. We find it easier to use a level and fasten the endcaps first and the supports second.
Build video: https://www.tiktok.com/@overture_3d/video/7301001493333708075
*Disclaimer: Print and test at your own risk. Fully loaded with ~40lbs of filament, each bracket will sustain 10lbs. Ensure that your studs, fasteners, and print settings are appropriate before loading.
Happy Printing!
- Greg and Overture Team