1 / 1
PC4-M10 with 6x3mm magnets and 4.3mm Inner Diameter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of "PC4-M6 and M10 with 6x3mm magnets" by mathiasl
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a coupler with 6x3mm magnets but also for a PC4-M10 with an inner diameter of 4.3mm.
Print settings
- Material: PLA
- Nozzle diameter: 0.4mm
- Layer height: 0.15mm
- Supports: Not needed