1 / 1
PC4-M10 with 6x3mm magnets and 4.3mm Inner Diameter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of "PC4-M6 and M10 with 6x3mm magnets" by mathiasl
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a coupler with 6x3mm magnets but also for a PC4-M10 with an inner diameter of 4.3mm.
Print settings
- Material: PLA
- Nozzle diameter: 0.4mm
- Layer height: 0.15mm
- Supports: Not needed