Liczymy pasujące modele…
This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets. There are two versions available: Holes for magnets are 3.0mm deep Holes for magnets are 3.2mm deep They exist because the first layer squish…
Mushroom Shelf magnet with 6x3mm magnet holes
I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
I liked the original benchy stand as it was a great way to show off how my different filaments printed and looked like, but it requires you to glue the pieces together. I didn't like the idea of gluing 3d printed pieces and, once glued,…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.
A remix of Cmarlow bit holder adapted to 6x3mm magnets which were esier to get for me. Also a few changes compared to original design to improve on design: Reduced depth of holes in which bits go, magnets are strong enough to hold them in…
Gear Shifter Fidget (6x3mm magnets) | REMIX (note: Modified to fit eight 6x3mm magnets instead of the original 5x3mm. And parts have to be glued together in the end.)
Corner plugs for the Prusa Core One using 3 6x3mm magnets. Reccomended to print in PETG or other temperature resistant materials.
Needed a version with PC4-M6 and both M6 and M10 with 6x3mm magnets instead of 5x5mm.
Remixed from Bambulab P1S Poop Chute to support for 6x3mm magnets
A purge wiper/bin designed to hold six 6x3mm magnets for Prusa CORE ONE
Remix of the original i found here. Print In Place Box With Magnetic Closure
I just edited the very good mod by John Doe to accomodate bigger 6x3 magnets (superglue suggested)
Changed length and magnet pockets size. 6x3mm round magnets are required for this version. Three for each tray.
Remix to use common magnet size from Voron printers. How many you use is up to you. Unlikely to need to fill every hole.
A remix of mgx bit holder adapted to 6x3mm metric magnets. Also made bit holes a bit more shallow so its easier to pull bits out. Requires 12x 6x3mm (2 for each hole) cylinder magnets. Magnet holes are tight enough that no glue is needed…
Remixed the model to fit 6x3mm magnets. It might be a tight fit, and it really depends on your magnets. You might have to make the hole a little larger.
This is a play on the EDC Screwdrivers that have a ball bearing at the end. Build requires a 6x3mm Magnet, Ball Bearing and M3*16 screw. Enjoy!
21/07/2023; i reuploaded the lid, as some users reported a corrupted file This is a remix of @cushmail_454332 design for a Hepa filter. I did not have 5x5mm magnets on hand, only 6x3mm. It needs a total of 20 magnets. It still has the…
A remix of the Articulated Slug fridge magnet by Lautrec_996, itself in turn a remix of the original articulated slug by 8ran on Thingiverse. This version utilizes two 6x3mm magnets. There are two slots, one in the head and one in the…
I wanted to use @3DInk_878748 's coupler but did not have the magnets in the size he chose. It allows you to use the standard PC4-01 M10 bowden couplers for 4 mm bowden tubes (to connect it to a dryer) and the original 4.4 mm reverse…
I printed mine in ABS and the magnets were a pretty tight fit. I pressed them in and I don't think they'll be falling out any time soon.
Changed top magnets from 9.5mm x 2.5mm -> 10mm x 2mm as they are more easily available in the EU
A remix of the door knob for the Ikea Lack enclosure, adjusted for bigger magnets, smaller knob, and with a top stopper. I basically redrew the part, with the following changes: Adjusted magnet slots to 19.75*5.7*3.2mm (my magnets were…
This model supports 6x3 magnets as opposed to the 5x2 on the original for added strength. Magnets will be a tight fit but should be press fit, may need light taps from a mallet to get fully set. The lettering was also raised to be closer…
Remix of the IKEA Lack enclosure door knob remix that uses round 6x3mm magnets instead of the 6x2mm magnets of the original remix. For the right door knob, simply mirror the left one.
This is another alternative base-plate for the Settlers of Catan 2.0" Series. Remixed from "2.0 base plate with integrated magnets" https://www.thingiverse.com/thing:3864468 by Swantu I accidentally ordered 6x3mm magnets instead of 3x6mm…
Wanted to make a compact fidget toy using 6x3mm magnets. I found the ones using 5x2mm magnets to be rather weak, and wanted to make something stronger. The outer case has spots for 3 magnets: magnets in the middle spot only…
---German Version Below--- Hello everyone, I have remixed the following model: https://makerworld.com/en/models/16983?from=search#profileId-15808 The changes are as follows, - Thicker rear panel for 6x3mm magnets, - I have added 2 extra…
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
Quick remix in tinkercad to use 6x3 magnets. I used 6 magnets and it hold on well enough, could probably get away with 4. Either load the 3mf Or import the cover stl to the slicer and add the other stl as a negative modifier. Tinkercad…
A magnetic charging stand for the Playdate . It uses 9 6x3mm round magnets: https://www.amazon.com/gp/product/B07873ZCY4 The magnets are connected to a standard 5v USB 2.0 charging cable (red goes to the top magnet and black goes to the…
This is a terminator that can be used with this PTFE connector: https://www.printables.com/model/369155-pc4-m6-and-m10-with-6x3mm-magnets It is suitable for M3 bolts and nuts
remixed this model to accept magnets that i had on hand so i wouldn't have to buy additional magnets just for this. takes 6x3mm magnets Update: I realized after I printed it that 4 magnets weren't going to cut it, so I added a fifth…
Intricate 40mm Bitcoin for use with 6x3mm or 12x3mm magnets. Can use an M600 colour change at layer 50. Based on the Bitcoin with circuit diagram design that is common. Circuit diagram generated by AI and chopped up by me, so this is an…
Remixed to utilize the 6mm x 3mm magnets I had on hand. The magnets are a tight fit so you are not likely going to need super glue. Items you need: 4mm paracord. 4x 6mm (diameter) x 3mm (thick) magnets 2x 12mm wiggly eyes. Super glue (for…
Changed to 6x3mm round magnets. Can be press fit, add super glue to be sure they stick.
Expanded the base to fit 6x3mm magnets , to do so I had to reduce the bin size . Everything fits nicely and there is no collision with the bed or the nozzle wiper. Thanks @meagerfindings for the original remix
I really like the Locking Hinges & Knobs by @Uko so I remixed it with my Lack Enclosure Door Knob remix for 6x3mm. You will also need the bolts from @Uko . Getting the bolts into the door knobs is a bit tricky, especially the first time.…
Here is a printable photoframe that can hold 8 magnets in it for secure connection to any magnetic surface
When I was making this remix, I realized that the magnets most commonly used in 3D printing (at least in my case) are 6x3mm. I tweaked the model a bit so it'd work with these magnets. I added the option of printing it in MMU as an extra…
I loved the OG model but only had 6x3mm magnets laying around :) I printed it in PETG, but PLA is probably fine. Supports are needed for the handle.
Cannibal Corpse logo as a fridge magnet
Remix to use 6x3mm round magnets. I designed this for PC-CF and the magnets fit very snuggly so no glue is needed. It may need scaled up a tiny bit if you print in something like ABS that will shrink. You'll just need to experiment. Tap…
Printed with black Elegoo TPU95 on a Elegoo CC1 with standard settings.
My take on the magnetic PTFE connector! This connector doesn't need a PTFE fitting, therefore saving you some money and time, no more waiting for your next amazon or aliexpress order (if you happen to have magnets lying around)! Theres…
This is a (not so quick, but still dirty) Remix of @Mushbrandon's Bambu Labs X1 Magnetically Detachable Purge Bin . I needed something double the width to accommodate a multi-material print and all of it's purges. I also needed something…
I saw a variety of magnetic straw holders on the web but none offered an embedded application for the standard 6mm by 3mm “3D printing” magnets. They all required them to be pressed in or glued and would come loose or be lost. I wanted…
Luke R did a great job with his model, but I had a whole stack of 6x3mm magnets that I wanted to use so I didn't have to buy more, so this allows you to choose how many. My posters are hung using 10 magnets due to being on a sloped…
With eight small printed parts and 24 magnets, you can easily detach a side panel on your OPE! Magnets: https://a.co/d/082uGbWU Instructions: Print 4x Horizontal Print 4x Vertical Insert 24x 6x3mm magnet into parts Remove nylon rivets…
This is a functional remix of the excellent Slimbox 2040: stickless all button low profile fightstick by @tryptech , updated to accommodate more common parts and simplify the assembly process. The Slimbox 2040 is a fantastic, low-profile,…
I made this in OnShape to act as a holder for 4 6x6x3 momentary pushbuttons with the goal of having a Pi Pico inside of it. I printed it at a medium infill and coarse layer height without supports on my Ender 3.
I needed a coupler with 6x3mm magnets but also for a PC4-M10 with an inner diameter of 4.3mm. Print settings Material: PLA Nozzle diameter: 0.4mm Layer height: 0.15mm Supports: Not needed
Remix of backside for https://www.printables.com/model/1205791-camera-case-for-esp32-cam-and-the-core-one-v2 but with smaller 6x3mm magnets - seems to be holding just fine.
Same as original but with 6x3mm magnets (Voron spec). You can split the 3mf file.
For anyone with a cabinet door that won't quite stay closed.
Clip de fixation en 2 parties pour câbles.
Courtesy of ShikyC over on Makerworld for making this mount for the Toto C200. The version they made had 6x2mm magnet holes, but I needed 6x3mm holes so that's the only change. Included a STEP file for ShikyC's original model too since…
Magnetic Base for the “ Tiny telescopic hand V3 ” with three 6x3mm magnets!
Recommend you use .4mm nozzle Requires 4 6x3mm magnets. Magnets are hidden in print but only by a couple layers. This magnet should be strong enough to hold cards, photos, etc.
Same as the original model but for 6x3mm magnets
Just a remix of the founders plaque holder for the magnet size I have and maybe the ones you have too? Supports 6 x 2 mm magnet discs. Recommend painting supports onto the underside of the magnet holes. There's a tiny bit of clearance on…
It's @DavidSleep_340182's model but modified to fit 6x3mm magnets instead of 8x3s
A magnetic clip to hold and display your Printables badges. @denisgomez_469657's original file was for (2) 5x3mm magnets, and I just altered slightly to accommodate (2) 6x3mm magnets.
After I discovered the brilliant magnetic model of @Ben, I wanted a docking part for it to finish my drybox setup. For this system you will need: PTFE PC4-M10 connector 6x3mm magnets (4 for each connector+4 for the endcap) A spool of TPU…
A magnetic clip to hold and display your Printables badges. @denisgomez_469657's original file was for (2) 5x3mm magnets, and I just altered slightly to accommodate (2) 6x3mm magnets.
Same as the original model but for 6x3mm magnets
I loved the OG model but only had 6x3mm magnets laying around :) I printed it in PETG, but PLA is probably fine. Supports are needed for the handle.
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
Intricate 40mm Bitcoin for use with 6x3mm or 12x3mm magnets. Can use an M600 colour change at layer 50. Based on the Bitcoin with circuit diagram design that is common. Circuit diagram generated by AI and chopped up by me, so this is an…
BLLed Magnet Cover for 6x3mm magnets i had left over from a voron build they are push fit
This is a simple remix of the neoyarus clip adding a slot for a 6mm x 3mm magnet. You will need to pause the print in your slicer and add the magnet.* For me, that was layer 20 w/ .2mm layers on Prusa slicer. You can get the magnets for…
These are a very handle cable clip that uses a magnet I had on hand from other projects. They hold a number of cables very securely. Perfect for routing cables. A simple print with a little test for how good your bridging is. I simply…
This is a remix of PrintHue Ventilation Cover. I added spots for eight 6x3mm magnets. I also repositioned the parts for better printing. Does not require any supports now.
Just a simple remix to allow for use wit 6x3mm magnets. I made the pieces a bit thicker plus I changed the hinge pin diameter to 3mm (3.4mm) so either a piece of 3mm filament or a 3mm bolt/nut can be used to secure the two halves…
Remixed to use 6mmx3mm magnets popular with Voron projects. I made a double magnet option to increase magnetic effect. The change was marginal. My version does not use a heatset insert, just self tap an m3 screw. Graham's model has a…
Customized version of https://www.thingiverse.com/thing:951308 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=951308 Instructions Using the following options: base = 0.7 magnets = 2 magnet_height = 3…
Ratrig Rat Pack blower O-Ring - 106x3mm Rat-Pack Github
I used this to attach a steel rule to my multiboard, but any magnetic flat object would stick. It incorporates a pause at line 20 to add 6mm x 3mm magnets.
This is a remix of the Prusa CORE One Magnetic Holder created by CNC Kitchen but uses 6x3mm round magnets.
I designed this model to be used with my Original Prusa Enclosure, but can be used anywhere with a metal surface. Model uses 6x3 circular magnets. I recommend printing in PETG as .20mm layer height. The magnets are designed to be press…
Remix of Core One Purge Bin with 6x3mm Round Magnets. Increased the base by 1mm to allow for the round magnets thickness. Magnets should just press fit into the model. Printed mine with Prusament PETG Prusa Orange at 0.2 Speed Print…
This hook uses a single 6x3mm magnet. No print supports were needed. It was made to hang this bed scraper: https://www.printables.com/model/124297-scraper I am sure that other things could be hung from it as well. Enjoy.
Overall dimensions at 180 x 120 x 30mm. Magnets used are 6mm diameter x 3mm height. The inside rolling area is ~112mm x 118mm. Designed for a press-fit of magnets, so it might be tight. Make sure you have a well-tuned printer and try the…
6x3mm Magnet Remix This is a remix designed to accommodate 6x3mm magnets . To ensure the magnets remain securely seated and don't break through the casing, the base of the model has been slightly thickened. Print Instructions Layer…
This is a compact, ergonomic Stubby Hex Bit Driver (6.35mm) designed for tight spaces and quick adjustments. It features a comfortable bulbous handle for maximum grip and torque in a small form factor. The driver is designed to use a 6mm…
Expansion case for the LTT Precision Screwdriver, with holes for 6x3mm magnets. You should superglue the magnets in if your magnets are at all undersized.
KitKat Magnet Fidget (6x3mm) I used PLA and it worked well. NOTE: Super glue is heavily recommended. (The magnet falls out if not.)
Voici un système de rehausse (spacer) conçu spécifiquement pour les grilles de type "nid d'abeille" de la marque Tyvok . Ces pieds permettent de stabiliser et de surélever votre grille de découpe laser. La particularité de ce design est…
Here is a printable photoframe that can hold 4 magnets in it for secure connection to any magnetic surface
Remix of Magnetically indexed Brio compatible multiway turntable with larger magnets (6 mm diameter, 3mm thickness). Add PAUSE to insert magnets!
Variation for 6x3 Magnets. Fits Core One and Core One L
This is a remix for different size magnets. Now each bit has it's own magnet. The magnet slots are closer to the bits and thus hold on better. The slots allow magnets of 6x3mm but I have used 5x3 successfully. Additionally I have added a…
Magnetic PTFE Joiner cap 6x3mm magnets I wanted a lower profile version compared to the ones that are out there, working with 6x3mm magnets and a space for the filament to stick out.
I already had 6x3mm magnets for a Makers Muse puzzle so I enlarged the holes to fit. 11/2/2020: Deepened the magnet holes a fraction as they were holding a small gap when assembled. Oops.
Liked the original idea, but did not have the correct magnets available. Remixed for 6x3mm magnets. Attached Fusion 360 file, step file and STL of the remix. Everything else as the original.
![Polaroid Magnet Fridge Frame [6x3mm]](https://media.printables.com/media/prints/1198649/images/9004502_61c4f09d-9fd3-4696-a44f-0b387682a2f6_02f4af28-1c1f-4c6b-ab5a-be232538172a/screenshot-2025-02-19-090047.png)
![Polaroid Magnet Fridge Frame [6x3mm]](https://media.printables.com/media/prints/44be8c73-9258-42fc-b77e-17f256dfb115/images/12883125_ba130632-bf81-4fe9-a347-7c4288ddad38_e49cc6f1-e2a8-4fc4-abb2-c0c7e5c6bc31/whatsapp-image-2026-05-06-at-44538-pm.jpeg)
