1 / 3
Ikea Lack Enclosure Door Knob remix for 6x3mm round magnets with Locking Hinges — zdjęcie 1
1 / 3

Ikea Lack Enclosure Door Knob remix for 6x3mm round magnets with Locking Hinges

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mashup of my Ikea Lack Enclosure Door Knob remix for 6x3mm round magnets with the Locking Hinges & Knobs by @Uko

Ocena
0 / 5
Polubienia
13
Pobrania
43
Wydruki
0
Wyświetlenia
519
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I really like the Locking Hinges & Knobs by @Uko so I remixed it with my Lack Enclosure Door Knob remix for 6x3mm. You will also need the bolts from @Uko.

Getting the bolts into the door knobs is a bit tricky, especially the first time. I used a 1 Euro Cent coin and needle nose pliers to get it done. After the first time, the bolts move very smoothly and you only need the pliers for the final tightening.

Also checkout the original models for more information. Most importantly, the instructions from @Uko:

Print instructions

Recommended layer height: 0.15mm (so the threads inter-operate well).

‼ When printing knobs you have to pause the print and insert the magnets before the cavities are sealed

 

Tagi