1 / 1
Compact Magnetic Fidget 608 bearing & 6x3mm magnets - adjustable strength
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fidget wheel using a 608 bearing and some 6x3mm magnets. The strength can be adjusted by using more or less core magnets
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
Wanted to make a compact fidget toy using 6x3mm magnets. I found the ones using 5x2mm magnets to be rather weak, and wanted to make something stronger.
The outer case has spots for 3 magnets:
- magnets in the middle spot only (empty-N-empty) will give you a decently magnetic fidget toy
- magnets in the outer spots only (N-empty-N) will give you a strongly magnetic fidget toy
- opposing polarity magnets in outer and middle spots (N-S-N) will give you a very strongly magnetic fidget toy
- same polarity magnets in middle and one outer spot (empty-N-N) will double the number of steps or clicks
I opted for option 3 for my first attempt and it was painfully strong, and surprisingly heavy.
Print/Assembly notes:
- you'll need to pause the print of the inner portion to add in the magnets (pockets for magnets in the outer portion are open, so you can glue them in once fully printed)
- you'll need to print two of the outer pieces to glue them together once everything is assembled
- alignment pins weren't necessary for the outer halves as the magnets aligned everything surprisingly well