1 / 3
Tiny SA / Nano VNA Wedge Stand II
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Larger version of the original with a higher angle and Storage.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 201
- Makes
- 0
- Views
- 1,247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a larger version than the original; It sits your instrument at a higher angle and has a storage compartment with a press fit cover. The screwdriver in the picture is to emphasize… It is a Press-Fit! Once you get the Cover on, you'll have to pry it off. The cover is hard to get on at first.
Also, if you want to use the stylus holder… You'll need to open it up with a drill bit; 5mm or a few passes with a 3/16" should work.
There's only one STL file; The wedge and cover print at once.