Counting matching models…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
An enclosed mount for a Nitecore TUP flashlight for picatinny rails. Ideal for airsoft pistol. All controls, screen and charging port are exposed so that you don't have to remove it every time.
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
Print-in-place articulated Tiny Penguin and Snowman! Keychain versions included! Considerations: They are small and articulated. That means good bed adhesion is required . For tricky filaments that usually have worse adhesion I recommend…
It can be printed in TPU PETG ASA an author impact-resistant material fits 20mm pole For different size holes, you may scale the model was designed with these gates in mind https://www.aliexpress.com/item/1005007766634281.html
This model repurposes the parts from the rather large Prusa Buddy 3D Camera, into a much smaller package more suitable for a 3D printer. The printed enclosure consists of 3 parts that snaps together, and no screws are needed. As this are…
What a POC for a 10" rack POC for a modular compute blade 1U system very shallow depth (~100mm) Why Modularity, I like the idea you could swap out some of these with a custom module. 10" rack width and limitations of my Prusa Mini's bed…
My version of spool storage bracket small yet sturdy requires 2 screws per bracket requires at least ½" x ½" aluminum or ½" x 1" wood
Instead of a big scraper you only use for scrape lines, try this tiny purge line remover tool to save your fingers and time. It is an extremely quick print with no supports needed and has a sharp enough edge to separate the purge line…
This tiny poop deflector was specially designed to not only look good, but also make the rare poop that sticks on it easily removable. I used an organic pattern because most other deflectors out there only use rigid lines or honeycombs…
The DHT11 case is a compact and durable enclosure designed to protect the DHT11 sensor from physical damage and environmental factors while maintaining optimal functionality. The case includes strategically placed ventilation openings to…
💀 Skull Keychain – A Tiny Touch of Edgy Cool Need a little flair for your keys, bag, or backpack? This 3D printable skull keychain is the perfect mix of spooky and stylish. Compact, cleanly designed, and easy to print, it’s a fun quick…
Affiliate links for my favorite filaments to help support what I do are here: Linktree A simple mount that cleanly display's your Ace of Spades nerf gun on the wall in either vertical or horizontal orientation. It inserts into the chamber…
These are inserts designed for the KIWIFOTOS RBC-65XCR battery case to hold BetaFPV style BT2.0 1S tiny whoop batteries. Each case will hold two trays, allowing you to carry either 12 of the full-sized batteries (Air 75, Cetus, etc) or 14…
Minimalist Card Holder – Quick to Print & Material-Efficient This sleek, minimalist card holder is perfect for neatly displaying and storing playing or trading cards. The design is optimized for fast printing and low filament consumption…
Just adapted to use 5mm ball since I didn't have 5.5mm one
Background There are several 10" rack mounts for these TinyMiniMicro PC's, but none of them quite sat right with me. My goals for this were the following: Conform to the un-official 10" rack dimensions seen here (254mm x 44.45mm). PC Is…
Print-in-place and almost no assembly required! Fully articulated T-Rex. Just slice and print! Feel free to scale them up or down as much as you want, it can be printed tiny or huge! (the limit is your printer). I STRONGLY RECOMMEND…
hese fun little traffic cones are just 1 cm tall , designed for 1:76 scale RC tracks like Turbo Racing , or for use in dioramas and miniature scenes. Perfect for marking corners, chicanes, or drift zones, they’re quick to print and add…
This grumpy little cottage looks like it was built by a goblin contractor with anger issues. Horned roof? Check. Eyebrows that could file a complaint? Check. A front door that is, in fact, a giant mouth with teeth ? Double check Perfect…
Was having trouble finding a small, inexpensive PDU for my 10" minilab rack mount server with a bunch of USB ports (to avoid filling the rack with adapters). Then had a little epiphany about in-desk power supplies! Found this little…
A compact honeycomb storage box designed for 45mm tri-blade propellers , ideal for tinywhoops like the HappyModel Mobula 7 . Stores 3 stacks of props. The small version stores 9 props while the large stores 27 props. . Honeycomb design…
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
Stand to hold your McDonalds Tiny Tan Figures. The model is sized to fit on a 220x220 print bed with no issues. The holes should fit the model snugly as well.
My recommended print settings that I've used are 30% gyroid infill with PLA, no brim, and auto tree supports. You can go lower to save on cost but I found 30% gives it a more sturdy premium feel when you pick it up, and the shelves that…
As a software engineer, I run and maintain a bare-metal Kubernetes cluster on my mini PCs. I used to stack them on top of each other, and they would get extremely hot under heavy loads because there was almost no room for airflow. I’ve…
I took rtj's design and expanded it to 36 cm., please refer to the description of rtj, that is the real job.
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
this is a frame for the newbeedrone v4 aio board and should work with most 6x6x6 mounting pattern tiny whoop motors. NOTE: the file needs to be cut in prusa slicer the weird piece on the side is not supposed to be there so cut it off and…
An Earth artifact, refashioned to suit the Emperor's modest tastes. Disclaimer: this model is a prop gun that does not shoot anything Please refer to the original model for hardware, printing, and assembly instructions: Extra Assembly…
It's just a tiny chair. Example model in pictures is 50% size, you can used scaled down file or do it yourself, bottom of seat may droop when printing, and stringing will happen. Should fit on almost all printers.
Affiliate links for my favorite filaments to help support what I do are here: Linktree All 5 magnets print in around 1 hour of printing time. My wife likes to hang magnets around her work so I made these for January. Hopefully these will…
This is Bob The Robot. Yes I named him that on the spot. He's small, and he's a robot. He doesn't hold many other personality traits, may have joint pain.
I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not…
This is a simple and fun print for people who love teeny things! DUCKIES!!!👹🐤
It is a Voron Trident–based printer with a build volume of 150 × 150 × 150 mm. The design is a mix of Voron Trident, Tiny-T, Ratrig, and custom original designs. The electronics, which were previously concentrated in the bottom of the…
Vous pouvez l'imprimer en deux versions : 1 - Modèle 4 couleurs, 2 - Modèle 5 couleurs ( en photo) Hauteur de couche 0.2 Remplissage 100% 2 parois -Fichier : CADE6.3MF 4 couleurs : Commencez par le noir, 0.00 - 0.84 noir 0.84 - 1.24 Gris…
This small cap, printed from TPU prevents screws from slipping when used to clamp things (e.g . table vise as seen below). Printed from Overture TPU 95A .15 mm layers 4 perimeters 6 topps/bottoms
It is a very mysterious and powerful device and its mystery is only exceeded by it's power! Original description: https://tol.acritum.com/2110/attiny814-frequency-meter Translation:…
Frame for a 31mm "Tinywhoop" style drone with a 25mm AIO board (the board in the examples is the EMAX Nanohawk AIO). The major issue with this design is flexion of the "X" base affecting trim. Print it with as stiff a material as possible…
Gridfinity box storage inserts for 65mm tiny whoop(hummingbirdv4). inserts are sized to 36mm gridfinity. They will not work with 42mm(standard). Designed to go with a modified version of a gridfinity box made by @PaulMostioru_1755420.…
This heart-shaped headphone stand is a functional desk accessory designed to hold over-ear headphones while doubling as a decorative object. The stand is built entirely from repeating heart shapes, creating a playful and recognizable…
Connector to build gates from 20mm PVC tubes for racing with Tiny Whoop FPV drones.
🔒 Copyright & License Notice This model is protected by copyright and is intended for personal use only .If you would like to use this model commercially or support further development, please review the available paid subscription…
This remix of the N6ARA Tiny Paddle (plug version) adapter for the QMX radio allows for its use with the Venus SW-6B radio. This adapter reduces the stress on the radio's key jack much like does with the QMX. To use insert the tiny paddle…
Veiled Statue from Destiny 2 Created with Fast3D AI and refined in Blender for clean, reliable printing.
A small wingless dragon designed with a friendly posture and smooth surfaces for easy FDM printing. The image shows visible layer lines and an amateur desk photo to emphasize its real-world printed look. Powered by MakerWorld –…
This is just the Battery insert for the BetaFPV Air65 Tinywhoop Case made by melnikod !!! I shrinked just the general size (red markings) by 0.2mm, because it would not fit. The Battery recesses are now a little wider by 0.2mm (red…
Simple mounting bracket designed to hold a Makerbase TinyBee control board securely inside an enclosure or cabinet. Keeps the board stationary, protected, and easy to access for wiring and maintenance. Designed for M3 hardware Mounts to…
This is a TINY rail gun... half. To make a rail gun, purchase 15 magnets, 1/8 x 1/8 x 1/2 inch in dimensions: https://www.kjmagnetics.com/proddetail.asp?prod=B228 Print 2 of the M15365_RailGun_1. stick the magnets in the spaces provided…
Small hexagon token with the Destiny icon inside of it. There's space for a 10x2 mm magnet in the back!
An enclosure that allows you to use tinyCurrent with three AA batteries. Advantages Uses easily available batteries Additional weight (sits better on the bench) Extended battery life Additional Parts Required 5× M2 × 8 mm countersunk…
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…
I needed an extra‑tiny plant pot for growing small plants inside little jars—but nothing on Printables was quite small enough. Scaling existing models down only made the walls too thin, so I designed a purpose‑built solution. These mini…
Printed in PLA (0.2mm), pint-in-place and no supports needed, it was designed to fit inside the instruments case and to be a simple stand. The difference between the 2 options is that the stand specialy intended for the TinySA Ultra+ has…
Set up the following way (back to front): 1 mm insert for thin PCB (Nooelec UWB antenna) 6x square holes for cheap Ali/Amazon probes 2 mm insert for normal thickness PCB (1.54 mm): H-Tool SL-10 mini LogPer antenne 2x mount for VHF and UHF…
This is a tiny spoon for this tiny Brown Bottle (amazon paid link) I use it to extract small amounts of chili powder🌶 from the bottle. The spoon is a remix of https://www.thingiverse.com/thing:642768 I also added a TPU seal for the screw…
Guitar pick design based on the "Pick of Destiny" The model is 1.4 mm thick and can be scaled in Z to suit. Set color change for the top 2 layers
I was tired of bulky standard bag clips and purely functional designs that look like they belong in a toolbox. I wanted something slimmer. Cleaner. A clip that actually looks good in a modern kitchen. That is how this design was created.…
Hi! I just got my A1 a few weeks ago and this is my very first attempt at 3D modeling. I adore mini flexi animals! This is a little lion cub loosely inspired by Simba, I'll add a colored pic when I have one. No supports needed I'm sorry…
This is a super-duper weenciely tiny low poly looks like its been carved wolf. You can give it to somebody or put it in your pocket to look at. I printed it with supports under the tail even though it's so small it doesn't need them. This…
I've created this version of Cordir's Log antenna mount. I changed the interface to accept a M5 Threaded insert, to allow it to be attached to a custom case I've deisgned using an M5 Bolt.
will post actual pic once done printing. its a remix of a tb6600 din rail mount. i just removed the holes and add spacer/standoff thing for self-threading screws.
Ziki is the little seahorse with big charm energy! With a curly tail, chubby cheeks, and ocean-bright eyes, he’s ready to float right into your heart—and your print bed. Super quick to make and with just a few light supports, Ziki is your…
New version of the Tiny Table Vise The design consists of 7 parts and only requires supports for the base of the clamp. It features two independent clamping mechanisms: One clamp securely attaches the vise to your table A second clamp…
New version of the Tiny Table Vise The design consists of 7 parts and only requires supports for the base of the clamp. It features two independent clamping mechanisms: One clamp securely attaches the vise to your table A second clamp…
Tiny little camera keychain with storage for micro SD cards. Great to clip onto GoPro case or large camera strap mounting points. Carabiner mount on the side. Keychain and lanyard loop at the top, 'removable'. Cute little keychain to clip…
Thinkcenter Rackmount for minirack, made compatible with narrow clearance of AL2020 extrustion rack
Frame is designed for CNC cutting from 1.5 mm carbon fiber. Stack holes are 2 mm in diameter for flat-head screws. The protection I tried was made from PCTG; it holds for some time, but other plastics like nylon are probably needed.
Landing pad for your tinywhoops. Supportless print. Legs latch in open/closed positions. Can be printed in 3 segments to fit on the Prusa MK4. You'll then need 6 M3 screws and nuts to join the parts. The cool mesh grid can be achieved by…
A small pencil holder for your desk. It prints quickly and holds pens and small items like paper clips.
Design Concept The Cute Tiny T-Rex Keychain is designed to be an adorable and functional accessory for dinosaur enthusiasts. Its compact size is perfect for a keychain, making it both a fashion statement and a practical item. Purpose This…
If you cut the - Snap off blades 18mm - you get 7 parts, and each part can be a single blade. This small holder for this small piece ..... simple, requires no support or screws, and quick.....See the assembly image for more details. For…
I combined the three separate pieces into one piece to offer a simpler version to print for those that don't want to print in separate colors and assemble. My version is very scaled down so the magnets won't fit, I cut up sheet magnet to…
Optimized fir Meteor75 Pro, 1.5g only. Printet with tpu95a. No supports needed. https://tressym.eu/parts/joker - original designers, check them out!
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
🔒 This model is protected by copyright. If you want to use or sell physical prints, please check the paid subscription here: 👉 https://www.patreon.com/cw/Nieuchronny 📝 Description A cute mini cow from my mini animal series 🐮✨ Small,…
Small tray with funneling lid for filling the dosing capsules of the TM2. Prints well in PLA without supports on my MK4, but it might be a good idea to add supports to the overhang of the holes in the lid (excluding the grip). Without…
These Gridfinity bins are designed specifically for storing very small components such as PCB rivets, SMD parts, tiny screws, inserts, and other micro‑hardware that tends to escape the moment you open a normal container. The magic is in…
My hand tends to cramp when trying to use those tiny screwdrivers that come with some things. A TPU cover with a larger diameter solved that issue. I have included the FreeCAD file in case your screwdriever size differs.
Tiny Capybara Buddy 🐾 Meet your new pocket-sized companion! This Tiny Capybara Buddy is the perfect blend of cute and minimalist design—small enough to sit on your fingertip, yet packed with personality. Prints without supports! Want to…
Say hi to Elko, the mini elephant on a mission to melt hearts! With his sweet face, big ears, and stubby little trunk, Elko is the ultimate cute collectible. Quick to print and easy to love—your jungle desk buddy has arrived!
Model je možné vytisknout jednobarevně a nebo vícebarevně. Květy jsou o 1 mm vyšší než stonky, listy a okraj.
Print-in-place and no assembly required. Fully articulated Stegosaurus! Just slice and print! Feel free to scale them up or down as much as you want, it can be printed tiny or huge! (the limit is your printer). I STRONGLY RECOMMEND…
Got 10 minutes and 2g of filament? That's all you need for this cute little glider. A perfect print for testing.
Tiny Yoda Figure – Pocket-Sized Wisdom 🧙♂✨ Bring balance to your desk, shelf, or workspace with this adorable Tiny Yoda Figure ! Designed with a perfect mix of charm and simplicity, this miniature version captures that iconic wise…
