1 / 8
ESP32 Wroom Case with Sensor SHT31
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Case for ESP32 Wroom with SHT31 Sensor, no Glue and no Screw
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 200
- Makes
- 0
- Views
- 1,330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid
No Glue and no Screws needed
Just plug it together, you just need to solder the ESP32 and SHT31
To put it on the Wall you need only double-sided tape.
The Sensor should be on the side or below the ESP.
I printed in Prusament PETG Signal White with 0.4 Nozzle and 0.2 Layerhigh
Organic-Support for the Case if you need only for the USB-hole. The Lid dont need support if you print on the honeycomb side.