1 / 6
Drill Press (for drill, dremel or any other tool)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Column Drill Press for drill, dremel or any other tool
- Rating
- 0 / 5
- Likes
- 99
- Downloads
- 224
- Makes
- 0
- Views
- 2,149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Compatible with:
- Dremel
- Drill (Verto)
- any tool if you connect the universal plate with your adapter
Required Materials:
- Metal tube with a 60mm diameter (I used a table leg from a construction store)
- M8 screws, 30mm in length
- M8 screws, 100-150mm in length (several pieces)
- M8 screws, approximately 80mm for the handle
- Plenty of M8 nuts
- Plenty of M8 washers
- 10mm thick boards or plywood (about 17x25cm x2)
- Boards or plywood for the base
- Adhesive for reinforcement and gluing screws (I used two-component epoxy)
Additional Notes:
- If possible, use two-component epoxy for improved durability.
- It is recommended to use two toothed strips
- For Dremel use this adapter: https://www.printables.com/pl/model/58753-screw-mounting-for-dremel-3000-schraubhalterung/files