Desktop Knife Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This desktop knife display holds 3 tools with a maximum handle size of 30mm x 15mm.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 173
- Makes
- 1
- Views
- 778
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This desktop knife display holds 3 tools with a maximum handle size of 30mm x 15mm perfect for pocket or bali song knives and will accommodate most thicker OTF automatic knives.
I recommend printing laying flat on it's side. Users can scale the width of the display to their liking, my preference is that about 3/4ths of an inch or more of the tool hang off either side to make it easy to retrieve.
For best use I would recommend fixing the display in place with something along the lines of museum gel, Command strips, or 3M VHB tape depending on your use case.
Print settings:
Material: Any rigid material, PLA is fine.
Walls: 2
Infill: 10% Cubic
Supports: Not needed as long as it is printed on it's side.