URail Paulmann Mirrorball suspension ceeling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a suspension for a mirrorball, it fits perfectly in a Paulmann URail-System. The suspension consists an…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a suspension for a mirrorball, it fits perfectly in a Paulmann URail-System. The suspension consists an original Paulmann component and several other parts.
So the mirrorball-motor will be switched on/off with the light. It is also possible to switch off the motor by pulling the pull-cord-switch while the light is switched on.
Ive screwed the printed case to the ceiling with a screw and attached a large metal eyelet to the ceiling with which I secured the entire construction from falling.
- Paulmann Urail Rail-System
- Paulmann URail cable feed black #96916 (disassembled)
- Pull cord switch
- Mirrorball Motor (disassembled from Eurolite motor)
- grub screw (m3x10mm 3pcs.)
- wago clamps (3pcs.)
- various screws, hooks, chains
- nylon thread
I drilled two holes on the underside to hold the motor, cause it was to complicated to draw it in the model.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.16
Infill:
25%
Filament: noname PLA Black
Category: 3D Printing