RC Car Drift Wheels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drift wheels for RC Cars with 12mm hex couplers. Built for WLToys 144001.
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 194
- Makes
- 1
- Views
- 1,117
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a drift wheel that I made for my WLToys 144001. I wanted to be able to drift around on carpet or concrete and these wheels make it happen. They should fit any RC car or truck with a 12mm hex coupler and a 3mm shaft.
NOTE: I have included a test print to check your machines tolerances. The model is sized at 4mm for the shaft hole and 12.3mm for the hex adapter. I strongly suggest printing the test print first to make sure it will fit your car and adjust your settings before printing the wheel.
Printing Instructions: This model should not need supports. I printed in Polymaker PLA+ and it is holding up on outdoor roads. I would print with 3-4+ perimeters for durability.